MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL

MAD 4006 EEE Brushless Drone Motor

320KV
$50.82
$50.82 $66.00
Skip to product information
MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL
  • MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL
  • MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL
  • MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL
  • MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL
  • MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL
  • MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL
  • MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL
  • MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL
  • MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL
  • MAD 4006 EEEMAD 4006 EEE Brushless Drone MotorUAVMODEL
MAD 4006 EEE Brushless Drone Motor

MAD 4006 EEE Brushless Drone Motor

$50.82
$50.82 $66.00
TYPE

Product Overview:

The MAD4006 EEE is a brushless motor designed for multi-rotor model aircraft with a single-axis load capacity of 550~1100g, suitable for use with 13-16 inch carbon fiber rotors. It boasts a maximum single-axis pulling force of 2200g and a single motor weight of 72g. The MAD4006 EEE is tailored for professional aerial photography and industrial applications. The MAD4006EEE provides uninterrupted power support for various industry applications and professional aerial photography with its high thrust, high efficiency, light weight, and outstanding reliability. It is suitable for search and rescue, surveying, inspection, and other professional aerial photography fields.

Motor Data
Motor Model MAD 4006 EEE V1.0 Number of pole pairs 12
Stator Anticorrosive Varnished wire Degree 150°C
Motor Size D:44.5 × 24.1 mm Magnet Degree 150°C
Degree of Protection Rain protection Cable Length 150 mm 18# Awg(Black) silicone
Centrifugal Heat Dissipation Independent Rotor Balance ≤5 mg
Propeller Mounting Holes D:12 M3×4 Motor Balance ≤10 mg
Shaft Diameter IN: 4 mm Motor Mounting Holes D:19 M3×4  D:25 M3×4
Bearing 694ZZ*2 Disruptive test 500 V

Main highlights:

✔ Industry-leading thrust-to-weight ratio (30.5:1)

✔ Optimized for 6S-8S LiPo systems

✔ Low-RPM high-torque design for extended flight times

✔ Precision-balanced rotor reduces vibration to <5mg

Applicable models:
Professional cinematography drones (Red Komodo, Sony FX3 payloads)

Industrial inspection platforms (LiDAR/thermal imaging systems)

Advanced FPV racing (hybrid cinewhoop builds)

Agricultural monitoring (multispectral sensor arrays)

Recommended accessories:

– ESC: AMPX 40A PRO (2-6S)

– Propellers: FLUXER PRO 15x5.0 MATTF, LUXER PRO 14x4.8 MATT, FLUXER PRO 13x4.4 MATT, FLUXER PRO 15x5.0 MATT, FLUXER PRO 16x5.4 MATT

Selection and Installation Considerations:
• The propeller size and pitch should be matched to your aircraft configuration—an incorrect propeller can reduce efficiency or cause motor/ESC overload.
• Use an appropriately sized ESC and ensure the wiring harness can withstand continuous and peak motor current.
Ensure structural supports and connections can withstand torque and dynamic loads.
Perform a balance check and routine inspection before each manned flight.
Local aviation and manned flight regulations must be followed.


Frequently Asked Questions:
Q: Which propeller should I use?
A: – Propellers: FLUXER PRO 15x5.0 MATTF, LUXER PRO 14x4.8 MATT, FLUXER PRO 13x4.4 MATT, FLUXER PRO 15x5.0 MATT, FLUXER PRO 16x5.4 MATT
Q: Which ESC is compatible?
A: Please use the model provided by the manufacturer: – ESC: AMPX 40A PRO (2-6S)
Q: What is the delivery time?
A: Delivery time is usually 7-14 days, but please confirm the current inventory and delivery time at checkout.

KV320:

KV380：

KV740:

You may also like