Tmotor Sanded Matte P-series Propellers for Multirotors
Tmotor Sanded Matte P-series Propellers for Multirotors
Basic Parameters
| Item | Specification | Item | Specification |
|---|---|---|---|
| Model | 22 × 6.6 inch (558.8 mm × 167.6 mm) | Type | Integrated Frame |
| Reference Single Blade Weight | 45 ± 2 g | Material & Process | Carbon Fiber + Resin |
| Maximum Static Thrust | 11.5 kg | Operating Temperature | -40°C ~ 65°C |
| Optimal RPM Range | 2800 – 4800 RPM | Storage Temperature / Humidity | -10°C ~ 50°C / < 85% |
| Surface Treatment | Polished Surface |
Propeller Specifications
| Model (Diameter × Pitch) | Center Hole ID | Mounting Hole Spacing (Diameter) | Screw Specification | Weight per Piece (Average) | Optimal Operating Speed (RPM) | Thrust Limit |
|---|---|---|---|---|---|---|
| 8×2.7
|
5mm | 9mm (Dual holes) | M2 | 4.1±0.5g | - | - |
| 10×3.3
|
6mm | 12mm (Dual holes) | M3 | 8.1±1.0g | - | - |
| 11×3.7
|
6mm | 12mm (Dual holes) | M3 | 11.1±1.0g | - | - |
| 12×4
|
6mm | 12mm (Dual holes) | M3 | 14.5±1.5g | 5000~9000 | 4.0kg |
| 13×4.4
|
6mm | 12mm (Dual holes) | M3 | 14.2±1.5g | 5000~8000 | 4.5kg |
| 14×4.8
|
6mm | 12mm (Dual holes) | M3 | 15.0±1.5g | 4500~7500 | 5.0kg |
| 15×5
|
6mm | 12mm (Dual holes) | M3 | 21.0±1.5g | 5200~7000 | 6.0kg |
| 16×5.4
|
6mm | 12mm (Dual holes) | M3 | 25.0±1.5g | 4000~6000 | 7.0kg |
| 17×5.8
|
6mm | 12mm (Dual holes) | M3 | 26.5±1.5g | 3500~6000 | 7.5kg |
| 18×6.1
|
6mm | 12mm (Dual holes) | M3 | 31.5±1.5g | 3000~6000 | 8.2kg |
| 19×5.7
|
6mm | 12mm (Dual holes) | M3 | 41.0±2g | 3000~5000 | 9.0kg |
| 20×6
|
6mm | 12mm (Dual holes) | M3 | 47.0±2g | 3000~5500 | 10.0kg |
| 21×6.3
|
6mm | 12mm (Dual holes) | M3 | 58.0±2g | 2900~5000 | 10.8kg |
| 22×6.6
|
6mm | 12mm (Dual holes) | M3 | 45.0±2g | 2800~4800 | 11.5kg |
| 24×7.2
|
10mm | 20mm (Four holes) | M3 | 56.0±2g | 2400~4500 | 15.0kg |
| 26×7.8
|
10mm | 20mm (Four holes) | M3 | 69.0±3g | 1900~4000 | 18.0kg |
| 27×8.1
|
10mm | 20mm (Four holes) | M3 | 83.0±3g | 1900~3800 | 20.5kg |
| 28×8.4
|
10mm | 20mm (Four holes) | M3 | 74.0±3g | 1500~3700 | 23.0kg |
| 29×8.7
|
10mm | 20mm (Four holes) | M3 | 92.0±4g | 1400~3600 | 25.0kg |
| 30×10
|
10mm | 20mm (Four holes) | M3 | 93.0±4g | 1800~3500 | 28.0kg |
Environmental Conditions
- Operating Temperature: -40°C ~ 65°C
- Storage Temperature: -10°C ~ 50°C
- Storage Humidity: <85% RH (No condensation)
Precautions
-
Propellers marked “L” rotate counterclockwise when used with a motor (viewed from the front); propellers marked “R” rotate clockwise when used with a motor (viewed from the front).
-
Propellers are rigid structures. During high-speed rotation, contact with fragile or unprotected parts of the human body may cause severe injury. Use with extreme caution.
-
The propeller structure has been sufficiently strength-tested. Please operate reasonably within the recommended maximum thrust range. Exceeding the maximum thrust limit may cause blade damage. Do not attempt to test blade strength by bending or similar methods, as the force conditions differ greatly from actual flight and may also cause damage.
-
Before use, carefully check whether the propeller mounting screws are properly installed. The propeller must be securely mounted in place.
-
Before each flight, check whether the mounting screws are tightened. If the propeller is damaged or cracked, there is a risk of blade fracture—replace it immediately.
-
When storing propellers, avoid corrosive gases, harmful environments, temperatures exceeding -40°C ~ 0°C, and humidity above 80%. Pay special attention during long-term storage.
-
When installing the propeller on the motor, be sure to apply medium or higher strength threadlocker to the mounting screws.
-
Please comply with local laws and regulations when using this product.